| Water cannot be termed as pure unless it gets rid of all the dissolved minerals like Calcium, Magnesium, and Iron, which make it hard. Cosmic Water Softener is the one stop solution to convert hard water into soft water for easy consumption. As hard water flows over resin in the resin tank, the hardness is removed and the water becomes soft. This lowers the consumption of soap as well. The proven technology used in the manufacture of Water Softener purifies water and makes it suitable for various modes of consumption. How Does A Water Softener Work? A Typical Water Softener Has Four Major Items :
Hard Water Flows over resin tank.Resin is in the form of tiny beads that have a special chemical property.At low concentration of sodium in typical hard water, the resin beads absorb (Combine with them) the hardness of water & replace it with an equivalent amount of sodium in water.As hardness is removed the water becomes "Soft". The Resin has a fixed capacity of the amount of hardness it can remove.Once this happens, the resin can no longer remove the water hardness & the resin is called "Saturated" or exhausted. Fortunately, the same resin when exposed to high sodium chloride (common salt) concentration reverses the process & absorbs the Sodium & releases the hardness.This property is utilized in regenerating the exhausted resin.This is done by temporarily stopping the softening process & exposing the resin to high salt solution from the brine tank.The entire process is controled by the Automatic controller valve, calculated amount of water that can be softened before regeneration & after regeneration the controller rinses the resin to remove all silt not absorbed by the resin.The entire cycle lasts less than 1 hour.The softening process adds a very small amount of sodium in water which comes from the exchange process.It is not directly added from the brine tank.For example, water with 10 grain hardness will have a sodium addition of 80 ppm in the water after softening. ![]() | ||||||
| ||||||





















